Post cool swords n things

Cool Medieval Swords

How To Make A Sword

The six step method to making a real sword

The process of making a sword is more than what you see in the movies. For many people being a blacksmith is a fantasy where you pound steel against an anvil, dip it in water and voila! You have a completed sword ready to mow down the evil hordes of creatures that lurk in the forest. But swordmaking is much more than this. Swordmaking is both an art and a craft and it takes hard work, a lot of practice and a significant amount of specialized tools to create a sword. It also takes many years of practice to become proficient at this skill.

Before the blacksmith or swordsmith actually starts hammering or heating the metal for a sword there is a lot of work to be done. The sword size, shape, properties, and metal composition all have to be decided upon. These factors determine the amount of metal, the temperatures of heating and the specific steps in the process that have to be completed. This article doesn't cover the complete art of swordmaking. It will only discuss and outline the process of smithing the blade of a sword.

There are many different methods for making a sword and the art has changed over the centuries as technologies, tools and the science of metallurgy has changed. But for the past five hundred years there has been one method that still stands as the most common. This is the six step method. of taking a bar of the desired metal to a completed sword.

Step One: Forging

A bar of the desired metal or combination of metals is heated in a forge and then it is hammered into shape.(The shape of a sword) This hammering process can take a long time and it is called drawing out the sword. The sword is worked on in sections (usually around 6 inches in length) and repeatedly hammered and heated until it comes into the desired shape .This process is repeated many times and the sword is often heated then allowed to cool without hammering. This is required by the metal to keep the desired properties of strength and flexibility. Once this step is completed the sword is in the proper shape but the properties of the metal make it very brittle and something has to be done to give flexibility to it. You can watch my video of ths right here: Forging a Sword

Step Two: Annealing

Annealing softens the sword and makes it easy to grind into shape. The sword is now heated and then allowed to cool very slowly. Often it is wrapped in an insulating material to slow down this cooling. It can take as long as 24 hours and this annealing process makes the sword soft and easy to grind. Watch my video of Annealing a sword right here

Step Three: Grinding

Now the blacksmith uses a grinder to work out the edge and point of the sword. This would also be when any engraving is added. This is not a completed sword yet. It is still much too soft so it must be hardened. This video is coming

Step Four: Hardening

Now the sword is heated to a very high temperature and then placed into a quenching tank. (This is what we always see in the movies). This quenching allows it to cool quickly and evenly which will harden the metal. After this hardening the sword is brittle and something must be done to make it strong yet flexible.

Step Five: Tempering

Again the blade is heated and quenched. But now the heating is at a much lower temperature than was used at the hardening. This heating/quenching cycle may be repeated several times. This tempering allows the blade to be strong but not brittle. This is one stage where the skill and experience of the swordsmith is invaluable. It takes a trained hand and eye to understand the properties of the meta. It will have a certain amount of flexibility yet still retain its sharp edge. Now the sword is ready for completion.

Step Six: Completion

The sword blade itself is now complete. Now the additional parts will be added such as the pommel the guard and the hilt.
For the past five hundred years the only way to learn the art of swordmaking was to find a skilled blacksmith or swordsmith that was willing to take you on as an apprentice. Because of the specialized skills and tools, and the skill that is required this tradition remains the best way to do it today.
Before you invest lots of time in money in equipment and materials you should find a master that is willing to teach you the basics of the art. You won't have to devote your life to endless hours of hammering against an anvil and with a little perseverance, a little patience and some practice you will be able to make some decent swords that you can be proud of.

Want to watch a video of the first steps in forging a sword? I have created a vid and have it right here on my youtube channel. How to Forge a sword

Share this article

Related Posts

Medieval Swords
Medieval Swords
Gerber Cool Tool
Gerber Cool Tool

Latest Posts
Best Firearms in the World
Best Firearms…
FN F2 is best suited for both those who…
Antique Guns value
Antique Guns…
Indeed, the first question a pawnbroker…
Fighting Swords
Fighting Swords
Sword Fighting is Not What You Think…
The Colt Government 1911 A1 is the classic…
Gerber Folding Pocket Knives
Gerber Folding…
Best knife ever! Pop in a new blade whenever…
Featured posts
  • How to open Gerber Multi tools?
  • Medieval Swords
  • Gerber Cool Tool
  • Collector Knives and Swords
  • Collectibles Swords and Knives
  • Coolest Handguns ever
  • Real Swords
  • Cool Knife Blade designs
  • Cool looking Knives
Copyright © 2024 l All rights reserved.